The corresponding Ethernet LED at the front of the modem should light up. Please note: All equipment that is supplied by OntheNet is pre-configured which means you only need to follow the process above to connect the modem to your computer. If you have reset the modem or purchased it elsewhere please follow these steps to configure the modem with your OntheNet user details. Once you have connected the modem to your computer as above open a web browser and enter Click on the Quick Setup link on the left hand side and then click Next.
In the Wireless Configuration section enter the following details and then click Next. On the Summary Screen, review the details to make sure they are correct and then click Confirm. Click Wireless in the menu on the left, enter the following and then click Apply.
Plug the provided Power Adapter into the Power jack on the back of the Modem Router and the other end to a standard electrical wall socket. Power on all your network devices and then check to see if the LEDs of the Router display normally as the diagram below describes.
Note If the LEDs display abnormally, please check to see if all the cable connectors power adapter, phone line and Ethernet cable are well connected to your device. Insert the provided Resource. Then a flash video will pop up and show you how to connect your devices. After that, the Easy Setup Assistant will start. The configuration has now been completed. A dialog box will prompt you for the User name and Password. Enter the default values and click OK. Note If the dialog box does not pop up, please refer to T3 in the Troubleshooting guide.
T2 will help you if you forget the password. If Bridge is selected, please skip to D. Open the web browser. Username and password are both admin. After login, you can see Quick Start and you can configure it step by step. Options Report Inappropriate Content. Thanks Ada, that seems simple enough. Related Articles. TD -WN 0. Cancel Notify Moderator. Cancel Transfer Module OK.
0コメント